Type B & 12-30V DC LED F15T8 Tube Light (Rotatable) -18-Inch (17-3/4 Inches Actual Length) 1.5FT 7W, Warm White 3000K, Double-End Powered, Frosted Cover - for RV (Not a Plug-and-Play)

I got 2 warm white 3000K RV 12V LED bulbs after I deleted the ballast in my RV restoration project dinette light fixture. Took some soldering and heat shrink to extend the short fixture wires from Lance while bypassing the ballast circuit board, but my novice work appears serviceable and functions well, so yay! The light quality is greatly improved over the cool white florescent. No flickers and instant on. The instructions where informative and lead me in the right direction, though Lance's wire colors didn't help much (black, blue, red & white).

I had a single bulb ballast on an older fixture that went out. The ballast was very very expensive and I almost decided to replace the entire fixture. Once I realized I can simply convert to an LED bulb I looked up this product and it worked perfectly. The instructions were very easy to read and the conversion is super simple.The light works fantastic and it is much brighter than the original, and it also does not make the cabinet hot like the old ballast did.

Used to fix an RV florescent light fixture with a burnt out ballast. Rewiring to bypass the ballast took 5 minutes and new new wires, just snip to bypass and use the existing twists to wire the lamps in directly. These are very, very, very bright with a warm color. They are much brighter than another fixture I have still using florescent tubes, and draw less power to boot! I felt the included instructions and diagrams were clear on what to do. The light tubes feel solidly made, and in my eyes, the best option for converting Florescent 12v fixtures. Will definitely be using the next time I need to replace bulbs.Update: 5 years later these still work great and I just replaced all of my other fixtures with them. It was a quick 20 minutes to snip out the ballasts and convert two more fixtures. Visitors can’t believe how well lit our camper is!

I got these for the bedroom in my RV because I wanted a warmer white than the daylight light of the other bulbs that I got. The installation was a little more complicated since it uses the pins on the end of the tube to provide 12V on one end, and ground on the other end. I had to cut all the wires (the power to the ballast, and from the ballast to the sockets) in order to join these. A couple of 5-place Wago connectors helped with the job. The color is nice and the brightness is adequate, but they were about 50% more expensive than the other bulbs that I bought, probably because this was a 2-pack instead of a 10-pack. I am undecided on whether to stay with the warm light or change them to daylight (4000K).

Many of us have RVs, boats, etc. that have nice 12 volt fluorescent fixtures that are hard to replace with something else and there are no parts like starters and ballasts to fix them. These tube lights fit perfectly and look and provide light the same as the old fluorescents. I had no problems rewiring the old fixtures per the included instructions. These tubes are a great product for a reasonable price that, for me, solved big problems trying to replace non-working fixtures.

I had an under the cabinet CFL tube lighting go out (hard wired fixture) go out on me. Tried changing the bulb, then the starter - nothing. I opened it up and was going to try and replace the ballast but the darn thing was riveted into the fixture. I had 2 choices - either replace the fixture or convert it to LED. I did some research and although I did not find exactly the fixture that matched mine, I figured the steps were easy enough to replicate.Rewiring was not hard - just confusing at first. Definitely shut off the breaker before doing anything. The instructions that came with it was easy enough to follow and this thing worked like a charm. When you buy an LED tube, make sure that you buy the one where you can rotate the ends. Unlike normal CFL tube, only half of the LED tube lights up so you would have to position the lighted part to the right angle so it provides the light downward. Otherwise, it will be at an angle if it does not rotate.Bottom line, this thing is bright easy enough to install and I am very happy with it!

Not as difficult as I feared. Works better than expected. Instant in. No flicker. Nice color.

I have a 60 year old chrome fluorescent fixture above my kitchen sink that I really don't want to get rid of. Between bulbs and starters it seems like I'm putting money into it every few months. Now I think the ballast is dying. This bulb was the best solution I could find. Installation is very easy, but of course you have to rewire the fixture. If I had just disconnected the ballast and rewired the fixture it probably would have been done in 5-10 minutes, but I decided to completely remove the old ballast, clean the fixture and rewire the power switch. Instructions are clear and simple. Just connect each AC wire to a different socket - black to one end and white to the other.Light is very white and brighter than the old fluorescent bulb. Turns on instantly and doesn't make any noise like the old bulb did. Hopefully will keep my kitchen sink lit for years to come. The picture doesn't show the bulb directly but should give an idea of how bright and white the light is.

Fit my aquarium perfectly. Rewiring from the original fluorescent was easy. Instructions are very clear to understand. Nice and bright for my fish

These bulbs are an exact size replacement for our bathroom F15T8 Florescent bulbs.The 3000 Lumens warm white are the perfect match for the florescent warm white.Just be sure to measure old bulbs as per Fulight instructions, and you can't go wrong.Ballast bypass rewiring was a simple quick job. Well explained in enclosed instructions.

Lights fit very well and worked as expected. The rewiring diagram was quite clear and easy to do. Very happy with the product and delivery.

Arrived in good time , all in one piece, all work fine. Thanks.

I had already replaced the old fluorescent bulb in our Vent-A-Hood range hood three times, the starter once and was looking at replacing the ballast when I found this product.If you are handy, the installation is no problem. I permanently removed the ballast, starter and starter socket. I should have done this years ago instead of wasting money on flickering fluorescent bulbs.BTW, I thought the shipping and handling charges were a bit high, until I unwrapped the product...The bulb was packed so well in foam protectors that you could have used the package as a baseball bat without damaging the bulb. Excellent product! Excellent shipping!