CamelBak Eddy Water Bottle Replacement Cap

CamelBak Eddy Replacement Cap & Straw : Perfect replacement for my bottle. I needed a new cap and straw because my old original one no longer stayed down in the closed position and was getting moldy more often; I had been using it for years. This new cap works perfectly. It doesn't even leak when I flip the bottle upside-down. For the reviewers who were complaining that the straw was too long, the directions on the back of the package states to cut the straw based on your bottle. There are guidelines on the back of package telling where to cut and for which bottle. After I cut my straw to the recommended length for my bottle, it fit perfectly. You can always compare it with your old straw if the packaging is too confusing. I decided to get a new cap and straw instead of getting a whole new bottle because my current bottle has my alma maters logo on it.

This is my third replacement on a bottle I've had for about 5 years - the others seem to get mold developing in the mouthpiece that's difficult to get completely clean. With this newest one, I've been removing the mouthpiece from the bottle every night to allow it to dry out to prevent the mold. The straw was easy to cut to the correct length based on the template on the package, and installation was super easy.

The most common complaint I see about this product is that the straw is "too long." This is a universal replacement part for Adult Camelbak Eddy models. The straw and replacement lid are not designed for a specific size bottle. The back of the packaging has instruction for cutting the straw to fit your specific water bottle.I purchased this lid for use with my new Camelbak Chute water bottle because I wanted a one-handed drinking option. Unfortunately, the straw is too short. I can, however, tilt the bottle back like a traditional water bottle and drink that way. I am going to look for a solution to fashion my own straw that will better fit the larger Chute bottles.The bite valve does have a tendency to collect mold. This is, in part, due to the fact that the valve closes automatically, sealing in moisture. You can remove the valve from the lid for cleaning. Wash with hot soapy water (do NOT stick a brush in the slit as it can tear the bottle) and (if there's concern of mold) sanitize with bleach. Allow to air dry completely before use. (Even removing the bite valve, rinsing, and allowing to dry completely should make a big difference).

Its the correct thing but they give you a longer straw that obviously fit the largest size they do with any instruction to keep the old straw as a measure because you need to cut it to size.

The item arrived on time and works with my Camelbak bottle. It was nice to know that the straw comes at the longest length and with pre measured lengths for you to cut so that it fits the water bottle you have. I cut mine to be a little longer than recommended (I detest not being able to drink all of the liquid I place in my Camelbak), but do you! Overall, great quality and a much needed replacement. It's too challenging to wash the bite valve and honestly, after a while, it gets real nasty with gunk and mold, so the replacement is not only practical but refreshing. Very "new year, new me" vibes!

I have two old stainless steel .5 liter Camelback that I use all the time, and needed new lids. They were white and had just gotten too hard to get clean after all these years. My bottles appear to be called "Camelbak Better Bottle Stainless insulated .5 Angles", but I couldn't find it on the website. These lids worked, and they're black/grey, so they look much better than my old white lids. I had to cut a small amount of the straw off in order to fit, but that was easy enough. I am so happy!

Camelbak used to warranty these but they no longer do that. Its poorly engineered and black mold can and will easily begin growing between the straw and the lid, between the mouthpiece and the lid, and inside the lid, between the flex piece that folds and the hard plastic of the lid.At some point it will be cheaper to buy a Kleen kanteen or hydroflask instead of buying one of these every six months.

wish these lasted longer, the flip up valve seems to wear out and leak after a year or two. Bite valve is replaceable, but never wears out. Straw is replaceable but never wears out. cap is replaceable but never wears out. flip valve isn't replaceable but does wear out (the little silicone hose?)

A bit expensive for a cap, but cheaper than buying a new bottle. I had an older 750ml bottle where the pop up bite valve had finally snapped off and no longer functioned. Unfortunately there was no way of repairing it and so I had to buy a new cap. This is slightly different to my old cap, but it fits and works.The cap is designed to fit a range of bottles and so the straw will need to be cut down to suit the size of your flask. I made the mistake of guessing it and I cut it a bit too short. Had I not jumped the gun and read the back of the card it was delivered on I would have seen the cutting guide which would have been just right for my flask - my bad!

Bought to replace the one that came with my bottle. Great product.

Every now and then it kind of jams, I can’t suck water up from the bottle, and 8 have to open it up and fiddle with the little pressure release seal inside. Had the same issue with the one I replaced, but I thought it was just faulty. Looks like it’s an ongoing problem.

Ideal! My previous "nib" (or whatever the bit you actually bite & suck is called) had ripped slightly, so it was all drippy and leaky.This new one is great! Fully reccomend. It's the full lid, as upposed to just a replacement "nib", but it's nice to have a total new top to my bottle! :)

Excellent