3M Sticky Adhesive Replacement Parts for Pops Socket Base, 6pcs 1.38 Circle Double Sided Tape for Collapsible Grip Stand's Back, 2pcs VHB Sticker Pads for Car Socket Mount & Cell Phone Magnetic Holder

Worked perfectly! Thanks!I didn't want to have to buy another pop-up in addition to the new phone AND new case after dropping my frikken phone in the gutter. Geez

this product is amazing, i recently got a new phone and the adhesive was gone. the directions are simple and easy to follow. it came with 8 regular size and 2 small adhesive replacements, 4 alcohol prep pads to wipe down the pop socket base after you remove the adhesive and came in a small resealable bag made from durable plastic. my phone case is made from plastic and it stuck on instantly. the adhesive is very strong and in the directions it says to wait 10 mins to peel off the sticker but you only have to wait around 30-60 sec. i suggest buying this over a new pop socket because its a lot cheaper and you can change the adhesive 8 times. overall great value, would buy again.

This product saved my hide when I found out I would have to switch devices. My daughter bought me a pop socket for a medical device I need to use and then I found out we were switching to a different model and the old case wouldn't fit the new model. I tend to drop things a lot so needed the pop socket as a good grip. Included in the package were alcohol wipes to clean an item before applying the new adhesive. The directions say to let sit for 24 hours after applying but I didn't wait that long and so far it has been adhering to the new case. I would buy this product again.

These are not the best nor are they the worst. It is not easy to remove BOTH sides. One side is very simple, but the other side just doesn’t like to come free. Also, they are not super sticky, which I do not understand as they are supposed to be. I bought for the purpose of replacing the sticker off of my pop socket for my IPhone, but as stated above, I found it very difficult to remove both sides and then it wasn’t sticky enough. One of my pop sockets was on only for a week and fell off again. I put another on and this one has now been on for 3 weeks with no problems. I do not know if I just go a bad batch the two times I’ve ordered or what. Just something to be aware of. Thankfully you get a bunch so I'll just keep replacing them as they fall off!

I have a favorite design popsocket that finally lost it's grip power after 1.5 years of daily use. Wanted to keep and resuse it and was thrilled to find these adhesive dots. I've always trusted the 3M brand so decided to give these a try.You need to follow the directions, that's the most important part. I cleaned the old glue off the popsocket just by rubbing and pulling it off. Then I used the alcohol pad to clean it completely. I removed the yellow backing of the glue dot and placed it on the popsocket. I waited the 5 minute minimum for it to set up.I applied the popsocket to a new phone case that is glitter on the back so it's slightly textured. I cleaned the surface of the case where the popsocket would be going. I then used the tab to peel the red adhesive backing off the adhesive dot. Now..it was a little tough to do this as the foam with the glue on it kept coming with it but I would smooth the tab back down and kept trying until the 3rd try, it began to separate from from adhesive foam dot.I then applied the newly adhesived (I know, that's not a word) popsocket to the phone case and pressed well. I turned the case over so the popsocket was down and took a heavy object (for me it was a hammer) and laid it on top of the case (head down, handle up like an upside T). I left it like that for 24 hours. This adhesive becomes more adherent over the that time and it's at it's full power at 24 hrs. I then put the case back on the phone. Done!!! You don't have to go without using your phone/device for 24 hours though. If you are putting it directly on a phone, you just need to NOT USE the popsocket for 24 hours to give it a chance to set up and cure. I did it this way because I was putting it on a case so I didn't need to use it for that time.I have been using the case with popsocket for over a week and the popsocket has not budged. It feels very secure and is holding firmly.Just follow the directions and you should have success too! Don't take shortcuts on the curing time...wait the 24 hours and if possible, use some weight to make sure it's making good contact with your case/phone. Of course, if you are putting it directly on a phone, use your own judgement on using weight or not.

I’m not sure why pop sockets are not sticking anymore but this adhesive worked great! I tried three pop sockets thinking they were defective after realizing pop socket just isn’t making them how they used to. I had one for several years that could stick and unstick over and over, but the new ones are terrible and don’t stick at all. I was ready to give up when I found these adhesives. They were so inexpensive and easy to install. Just take the old adhesive off your pop socket and use this. It was hard to not unpop the socket for 24 hours but it worked. It’s been on for a few weeks now and hasn’t budged, I’m thrilled!